ABB DI814 24V module

Product specifications:
Applicable: Fuel, gas, and oil gas mixed combustion devices
Rated power supply voltage: 100Vac 50~60Hz
Power consumption: below 7W
Flame response: 3 ± 1s (when flame voltage is 4.2V)
Contact rating: 250VA
Flame sensitivity: Fire detection level: Flame voltage 1Vmax
Flame detection level: Flame voltage 0.4Vmin
Flame signal output: 0-5Vdc wiring distance 10m max (using shielded wire), output terminals: water side A (), B (+), external connection machine input resistance above 100kQ
Flame voltage display method: LED display
Flame voltage display level: fully extinguished
Permissible ambient temperature: -20~+60 ℃ (when only one unit is installed), -20~+45 ℃ (when more than 2 sets are installed)
Permissible environmental humidity: 90% RH at 40 ℃ (no condensation)
Vibration resistance: Below 4.9m/s2, 10~60Hz, 2 hours in X, Y, and Z directions each (when installing screws)
Insulation resistance: The insulation current between each terminal and the ground is above 50MQ when tested with 500VdcMQ
Voltage withstand: Between each terminal and ground, with an additional commercial frequency of 1500Vac for 1 minute or 1800Vac for 1 second when suspected flames are detected, there is no abnormality, except for the flame detection input of Nuozi G and 6
Surge absorber for lightning protection: 10kV, 1.2/50us (JEC-187 surge resistance above 75Q). When installing the surge absorber below the power supply on one side (terminal 2) and ground
·Recommended surge absorber: Specification Book No.10013 (83968019-001)
Lifetime: 100000 times (at room temperature, constant humidity, rated voltage)
Body color: gray
Installation method: DIN rail installation or screw fixed installation
Quality: FRS100C: Approximately 270g

ABB DI814 24V module

This controller is dedicated to driving 4 light sources and provides a total of 100 levels of brightness adjustment from 0 to 100. The flash mode provides a pulse width brightness of 0-9999ms, which can be controlled through panel or serial communication. The external trigger adopts a high-speed optocoupler isolation design, providing accurate and reliable trigger signals to prevent false triggering caused by external environmental shaking. It can be triggered at high or low levels. Provides power-off saving function, controller has advantages such as high power, high response speed, high stability, and high consistency of flash brightness.

Point. png supports multi axis applications (up to 64 axis synchronous control)
Point.png supports the standard EtherCAT protocol and is compatible with various CoE slave stations
Point.png supports interpolation motion with high-order S-shaped acceleration and deceleration
Point. png has a multi axis interpolation forward planning algorithm
Point.png supports spatial arc interpolation, spiral interpolation, electronic gears, and electronic cams
Point.png supports custom speed planning
Point. png supports embedding motion programs
Point. png has two IO connection methods: EtherCAT and gLink-I
Point. png uses PCIe interface (X1)

Contact information:+86 15359213550

1. A-B Rockwell
2. FOXBORO
3. TRNEX
4. OVATION Westinghouse
5. SCHNEIDER
6. GE FANUC Fanuc
7. SIEMENS
8. REXROTH INDRAMA
9. ABB
10. HONEYWELL
11. BENTLY NEVADA
12. YOKOGAWA Yokogawa
13. ICS TRIPLEX
14. BACHMANN
15. Emerson
16. EPRO
17. HIMA Black Horse and other imported industrial components!

Related models：

0745648E
07AC91
07AC91D
07AC91F
07AI91
07BR61R1 GJV3074376R1
07CR41
07DC91
07DC91C
07DC92
07EA90-SI
07KR264
07KR31
07KR51
07KR51 220VD