You are here:

ABB RMIO-11C+N652 Inverter motherboard

Working frequency: BD2 B1/GPS L1
Positioning accuracy: 3m (three-dimensional space)
Speed accuracy: 0.1m/s
Start time: Cold start 35s/Hot start 1s
Timing accuracy: 20ns (PPS)
Model:RMIO-11C+N652

WhatsApp:15359213550
WeChat:15359213550

ABB RMIO-11C+N652 Inverter motherboard

Introduction to motherboard
is a fully functional PC/104 embedded industrial computer motherboard developed in a size of 90mm x 115mm. This motherboard uses an embedded AMD Geode LX800 microprocessor, 256MBytes DDR SDRAM onboard, multiple I/O interfaces, 4 USB ports, and 6 high-speed RS232 standard 9-wire serial ports; Two of them support RS485 mode simultaneously. Support VAG, TFT, and LVDS display modes; 16 channels of DIO input and output; Standard PC/104 bus extension. Both the serial port and network interface adopt anti EMI design.
adopts a full pin design, small size, fanless, stable and reliable performance, suitable for various multi serial network industrial field environments, and has been widely used in various embedded intelligent devices such as intelligent transportation, power environmental protection, and environmental detection.
Performance characteristics
Embedded AMD Geode LX800 500MHz microprocessor, LX800+CS5536 chipset
256MBytes DDR SDRAM onboard
1 10/100M network card, 6 232 serial ports, where COM3 and COM4 support RS485 mode simultaneously
4 USB 2.0 supports USB boot
Multiple display modes supported by VGA/TFT/LVDS
128 level watchdog timer
● Single 5V power supply

 

 

ABB RMIO-11C+N652 Inverter motherboard

Product specifications
·Adopting CPU technology from Intel Atom, Intel Core, and Xeon
·No fan cooling
·Optional expansion slots
·Built in miniPCIExpress socket, suitable for various extensions
·CODESYS SoftPLC real-time environment with optional pre installation
·Expand the temperature range to 70 ℃
interface
2 x 10/100/1000 Mbit/s Ethernet, RJ45 connector
4 USB hosts connected, USB 2.0 or USB 3.0
Up to 2 isolated CAN/CANopen ports
Up to 2 RS232 ports
DVI-I connectors

characteristic
-MOXA ART ARM9 32 bit 192 MHz processor
-16MB RAM and 8MB Flash ROM
-1 10/100Mbs Ethernet port
-1 software optional RS-232/422/485 serial port
-Supports any baud rate (50bps~921.6Kbps)
-Expandable storage capacity through SD card slots
-Built in real-time clock (RTC), buzzer, watchdog clock
-Pre installed uClinux Kernel 2.6 operating system
-Provide -40~75 ℃ wide temperature module
-Supports rail or panel installation
-Fanless design, stable and reliable
Hardware specifications
System CPU: MOXA ART ARM9 32 bit 192 MHz processor
Operating system (pre installed): built-in uClinux, Linux Kernel 2.6
DRAM: 16 MB
Flash: 8 MB
Storage expansion: 1 SD card slot
Button: 1 Reset button, supports&quo; Restore factory default settings;
Other: RTC, buzzer, watchdog clock
LAN port: 10/100 Mbps, RJ45
Electromagnetic isolation protection: Built in 1.5 KV
Number of serial ports: 1
Serial port standard: RS-232/422/485, software selection
Connector: DB9 pin type
ESD protection: Full signal protection 15 KV
Console port: RS-232 (TxD, RxD, GND), 4-pin output
Serial communication parameter data bits: 5, 6, 7, 8
Stop bits: 1, 1.5, 2
Check bits: None, Even, Odd, Space, Mark
Flow control: RTS/CTS, XON/XOFF, RS-485 ADDC®
Speed: 50 bps~921.6 Kbps, supports non-standard baud rates, details can be found in the
Household Handbook
Serial signal RS-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS-422: TxD, TxD -, RxD -, RxD -, GND
RS-485-4-wire: TxD, TxD -, RxD -, RxD -, GND
RS-485-2 cable: Data, Data -, GND
LED indicator system: Ready x 1
Ethernet port: 10M/Link x 1100M/Link x 1 (located on RJ45 connector)
Serial port: TxD/RxD x 1
Mechanical characteristics shell: SECC metal sheet, 1 mm
Weight: 130 g
Dimensions: 67 x 22 x 100.4 mm (2.64 x 0.87 x 3.95 in)
Installation method: wall mounted or rail mounted
Working environment working temperature:
Standard models: -10~60° C (14~140° F)
Wide temperature model: -40~75° C (-40~167° F)
Working humidity: 5~95% RH
Storage temperature:
Standard models: -20~80° C (-4~176° F)
Wide temperature model: -40~75° C (-40~167° F)
Power requirements: Power input: 12~48 V
Power consumption: 300 mA @ 12 VDC, 3.6 W
Safety certification EMC: CE (EN55022 Class A, EN61000-3-2 Class A,
EN61000-3-3, EN55024), FCC (Part 15 Sub Part B, CISPR 22 Class A)
Safety: LVD (EN60950-1), UL/cUL (UL60950-1, CSA C22.2)
No. 60950-1-03)
Environment: RoHS, CRoHS, WEEE
Reliability alarm tool: built-in buzzer and RTC (real-time clock)
Automatic restart trigger: built-in WDT (watchdog clock)

 

 

Contact information:+86 15359213550

1. A-B Rockwell
2. FOXBORO
3. TRNEX
4. OVATION Westinghouse
5. SCHNEIDER
6. GE FANUC Fanuc
7. SIEMENS
8. REXROTH INDRAMA
9. ABB
10. HONEYWELL
11. BENTLY NEVADA
12. YOKOGAWA Yokogawa
13. ICS TRIPLEX
14. BACHMANN
15. Emerson
16. EPRO
17. HIMA Black Horse and other imported industrial components!

Related models:

0745648E
07AC91
07AC91D
07AC91F
07AI91
07BR61R1 GJV3074376R1
07CR41
07DC91
07DC91C
07DC92
07EA90-SI
07KR264
07KR31
07KR51
07KR51 220VD