IC660TBD024 output module

Interface
32 adaptive Ethernet RJ45 interfaces for 10/100/1000M
Ethernet port speed and distance
1/1000/1000M adaptive
Twisted pair cable, maximum transmission distance 100m
Optical port properties and transmission distance
Single mode 1310nm, multi-mode 850nm; Single mode 20km, multi-mode 550m (long-distance modules can be customized)
backplane bandwidth
256Gbps
Packet forwarding rate
190.5Mpps
Package cache area
24Mbit
MAC table
Supports 128K MAC addresses
VLAN
Supports port based VLANs (4096), 802.1QVLAN
Support GVRP
Layer 2 Ring Network Protocol
Support MR ring (self-healing time<20ms)
Support STP/RSTP/MSTP
Self healing ring networking method
Support multiple self-healing rings
Support tangent rings
Port aggregation
Support static aggregation
Support LACP dynamic aggregation
Routing redundancy technology
Support VRRP/VRRPv3
DHCP
DHCP Client
DHCP Relay
DHCP Server
IP routing
Support static routing
Support RIPv1/v2, RIPng
Supports OSPFv1/v2, OSPFv3
Support BGP4, BGP4+for IPv6
Support policy routing
Port Mirror
Support streaming mirroring
Support local mirroring
IPv6
Support ND (Neighbor Discovery)
Support PMTU
Supports IPv6 Ping, IPv6-Tracert， IPv6-Telnet， IPv6-TFTP
Multicast
Support IGMP Snooping v1/v2/v3, MLD Snooping v1
Support IGMP v3
Support PIM-SM, PIM-DM
QoS
Support limiting the rate at which ports receive and send messages
Support CAR (Committed Access Rate) function
Supports 8 output queues per port
Support flexible queue scheduling algorithms that can be set based on both ports and queues simultaneously
Supports three modes: SP, WRR, and SP+WRR

IC660TBD024 output module

Main features
*PoE power supply function compliant with IEEE802.3af and IEEE802.3at standards
All 8 ports provide PoE power supply that complies with the IEEE802.3af and IEEE802.3at standards. Each port can provide up to 30W of power, totaling up to 120W * of power for all ports.
*When the input power supply voltage is 12VDC, the total PoE power that can be provided is 60W. If the input power supply voltage is 24/48VDC, the total power of the PoE power supply for all ports can reach 120W.
*8 PoE ports supporting 1000BASE-T standard
8 ports that comply with IEEE802.3ab (1000BASE-T)/IEEE802.3u (100BASE-TX)/IEEE802.3 (10BASE-T) standards. All 8 ports have PoE power supply function.
*Supports ambient temperatures ranging from -35 to 70 ° C
Due to its excellent heat dissipation performance, the metal casing operates at an ambient temperature of -35 to 70 ° C and can be used in various environments. As it is fanless, it can be used in places where there is no noise and where quietness and longevity are required.
*12-57VDC wide range power input, supporting dual power supply
The input voltage range of a DC power supply is 12 to 57VDC. With dual power input function, the switch can continue to operate even if one input power supply fails. When one of the power supplies fails, the power supply fault can be confirmed by the LED or abnormal detection relay output signal on the front panel.
*Can be installed on DIN rails and walls
The installation bracket in the attachment can be easily installed on a 35mm DIN rail or wall.

Contact information:+86 15359213550

1. A-B Rockwell
2. FOXBORO
3. TRNEX
4. OVATION Westinghouse
5. SCHNEIDER
6. GE FANUC Fanuc
7. SIEMENS
8. REXROTH INDRAMA
9. ABB
10. HONEYWELL
11. BENTLY NEVADA
12. YOKOGAWA Yokogawa
13. ICS TRIPLEX
14. BACHMANN
15. Emerson
16. EPRO
17. HIMA Black Horse and other imported industrial components!

Related models：